Shenzhen Gorilla Software Co., Ltd. was established in May 2018. It is a software company dedicated to shoe industry software development, function customization, 3D personnel training, and providing overall solutions for brand owners. The company has a senior technical research and development team, a professional training team, and a professional after-sales service team. Orang software is also exported to Brazil, Mexico, Ivory Coast, South Korea,Vietnam, India, Turkey, Indonesia, Italy, Spain and other overseas countries.
Industry Difficulties and Pain Points
After years of industry difficulties collected by us and a large number of visits to more than 300 mold factories in the market, It was found that since 2015, the following difficulties and pain points have emerged.
Seven functional modules
Software Features
TEXTURED BITE
Automatic generation of epidermal 3D textures from grayscale images It is mostly used to replace the traditional corrosion bite
SKIN HOLLOWING OUT
Creation of skin cutouts flowed through deformation controllers. It is mostly used for pattern construction
FEATURE PERMUTATION 1
Feature replacement 3D by new and old curves Supports multiple curves Supports locked lines. Mostly used for shape modification
TESSELLATION OF SURFACES WITH MESH PATCHES
Automatic tessellation generation of tapped surfaces by selecting multiple mesh patches. Mostly used for reverse 3D modeling
UV UNWRAPPING
Unwrap surface meshes in batches by UV unwrapping to facilitate subsequent texture creation or mesh flow. It is mostly used for the preparation before the texture of the texture
MANY-TO-MANY SURFACE FLOW
Flow objects in a polysurface-to-polysurface fashion Support direction setting. It is mostly used for flowing patterns to modify the shape
MULTI-SURFACE UNEQUAL RATIO CHAMFERING
Use curves to guide multiple groups of surfaces to chamfer in batches, and the value can be set freely Realize gradual R angle, regardless of the logic limitation of RHINO chamfering. It is mostly used for unequal chamfering between multi-surfaces
MULTI-SURFACE FILLETS
Use curves to guide multiple sets of surface chamfering, the value can be set freely Realize gradual R angle, regardless of the logic limitation of RHINO chamfering
SURFACE SELF-INTERSECTION TRIMMING
Surface self-intersection trimming can be realized Support batch trimming Support manual selection mode Batch pruning mode retains the largest part by default. It is mostly used for unequal chamfering between multi-surfaces
ONE-TO-MANY CURVE FLOW
One-to-many curve flow can adapt to the direction of the surface Various flow modes can be defined. It is mostly used for false line production.
ONE-TO-MANY SURFACE FLOW
One-to-Many Surface Flow Adaptable Surface Orientation. It is mostly used for batch pattern construction
BATCH EXTRUDE SOLID MESHES
Extrude solid mesh with surface Support direction setting Supports normal extrusion Supports surface orientation It is mostly used for pattern repair of 3D printing
SOLID PROCESSING LINE
Solid processing line Generate solid NC lines with objects such as curves, closed curves, and points Support ball knife sharp knife flat knife or custom knife
Support machining to depth surface
Mostly used for 3D printing NC line processing
TWO SETS OF FACE NORMAL LOCAL PROJECTIONS
Project objects with the new and old two-face method Support partial support limited range
It is mostly used for shoe shape modification
IP SHRINKING MOLD
Comparison of IP shrinking with shoemagics, shrinking wizard and other shrinking software Surface structure, color, layer and other properties will not change
GRANULAR RANGE SEGMENTATION
Range split surface Support multiple groups of object split Support solid, surface, planar curve split
Can automatically generate segmentation boundary lines and automatically group after the segmentation is completed It is mostly used for trimming and dividing large patterns
BATCH CONVEX HULL
Batch convex hull can use lines and surfaces to make convex hulls of various types of surfaces.It is mostly used for Boost pattern, uneven diamond pattern, etc.
BATCH MESH CONVEX HULL
It can automatically generate convex hulls in batches in the form of three-point arcs Parameters such as height and center point can be set freely
Supports generating convex hulls in the form of four-sided meshes or inlays. It is mostly used for pattern construction
BATCH ROUNDED CONVEX HULL
Batch rounded convex hulls Generate rounded convex hulls with planar closed curves Parameters such as radius and height can be set freely
It is mostly used for pattern construction
BATCH V-GROOVE
Batch V-groove Generate V-groove with untrimmed surface
Support custom height, support V-shaped center shape customization Support custom side radian
It is mostly used for pattern construction
BATCH U-SHAPED GROOVE
Batch U-shaped ditch Generate U-shaped ditch with untrimmed surface Support automatic height Support custom height
Support custom R angle
It is mostly used for pattern construction
BULK T-GROOVE
Batch T-groove Generate T-groove with untrimmed surface Support automatic height Support custom height
Support custom side radian top radian
It is mostly used for pattern construction
WATER RIPPLE SURFACE EXPANSION
Ripple Surface Unwrap Unwrap the side wall surface with boundary curves Support side wall upside-down expansion
Support custom curve direction expansion
It is mostly used for the unfolding of pattern pasting and veneering
SIDE WALL UPSIDE-DOWN
Removal of the side wall upside-down Remove the upside-down part with the boundary curve Supports lifting at angles Lifting at curved surfaces Maintains shape
It is mostly used for removing and inserting TPR molds
SQUISH SURFACE AUTOMATIC UNWRAPPING
SQUISH Surface Unfolding Unwrap the surface with the original structure of the surface It is mostly used for pattern pasting
BATCH POSITIONING OBJECTS TO SURFACE POINTS
Batch positioning objects to points on the surface Move objects to points on the surface in the direction of the surface. It is mostly used for pattern pasting of popcorn, etc.
MULTI-CURVE BLEND
Multi-curve blending Batch blending of multiple curves Supports curved or surface edges
Mostly used for 2D line repairing
DIFFERENTIATE COLORS WITH CURVES INSIDE AND OUTSIDE
Distinguish colors by the inside and outside of the curve. It is mostly used for pattern construction and is a classification curve.
Mostly used for 2D line repairing
LINK TẢI VÀ CÀI ĐẶT PHẦN MỀM ORANG-RHINO
The first step is to install CodeMeter so we can create a file to authorize the license.
- CodeMeter software for windows 10 or above;
https://drive.google.com/file/d/15iY6g-uAXMartnE0FyftuNyLyifcPnxp/view?usp=drive_link
https://drive.google.com/file/d/1SuC6z4s-9f4SE7RwlIpN7iyLb2YhrzK9/view?usp=drive_link
- CodeMeter Software for windows 7
https://drive.google.com/file/d/1M2h9ueX1WL9Ek3Bo8ZacvYoGrd4-jfec/view?usp=drive_link
After installing we will use CodeMeter to create the file for validation, this file you will send to me, and then I will return it with a valid license.
Follow the steps above;
https://drive.google.com/file/d/1ynAd78lIaD03NXBfcB52wTmqa5ODpZGI/view?usp=drive_link
To install the plugin on an individual computer follow the steps in the video above;
https://drive.google.com/file/d/1ZhCRurmSMU2T6RLr8YMuglV3awYOaoaV/view?usp=drive_link
Files for installation
- Orang 3.04
https://drive.google.com/file/d/1e0qzBhtuDG53XBeEGCEyO0IzD8zwNOCb/view?usp=drive_link
- Single Fonte Curve
https://drive.google.com/file/d/1at0RPZApxb7MXIbfAGAN3LldUmZ7zKQY/view?usp=sharing
- Orang Grade 1.6
https://drive.google.com/file/d/1O0MOu492g_zDnOkUT1tLhjRrOWncdNX8/view?usp=drive_link
- Full course in Portuguese with English interface;
https://drive.google.com/drive/folders/16WzZl7jNR3RvqbR-ULSYZ4EmIDQqF1MA?usp=drive_lin
- The course has English subtitles
https://drive.google.com/drive/folders/1UX0nvgZ_VgCHefiFwK9do1RzGoWRky0c?usp=drive_link
- The course in Chinese language
https://drive.google.com/drive/folders/1qq6f_kGMuCEt1D3eKBYTUFmnLcH9XHw-
Đánh giá
Chưa có đánh giá nào.