Shenzhen Gorilla Software Co., Ltd. was established in May 2018. It is a software company dedicated to shoe industry software development, function customization, 3D personnel training, and providing overall solutions for brand owners. The company has a senior technical research and development team, a professional training team, and a professional after-sales service team. Orang software is also exported to Brazil, Mexico, Ivory Coast, South Korea,Vietnam, India, Turkey, Indonesia, Italy, Spain and other overseas countries.

Industry Difficulties and Pain Points

After years of industry difficulties collected by us and a large number of visits to more than 300 mold factories in the market, It was found that since 2015, the following difficulties and pain points have emerged.

Seven functional modules

Software Features

TEXTURED BITE

Automatic generation of epidermal 3D textures from grayscale images It is mostly used to replace the traditional corrosion bite

SKIN HOLLOWING OUT

Creation of skin cutouts flowed through deformation controllers. It is mostly used for pattern construction

FEATURE PERMUTATION 1

Feature replacement 3D by new and old curves Supports multiple curves Supports locked lines. Mostly used for shape modification

TESSELLATION OF SURFACES WITH MESH PATCHES

Automatic tessellation generation of tapped surfaces by selecting multiple mesh patches. Mostly used for reverse 3D modeling

UV UNWRAPPING

Unwrap surface meshes in batches by UV unwrapping to facilitate subsequent texture creation or mesh flow. It is mostly used for the preparation before the texture of the texture

MANY-TO-MANY SURFACE FLOW

Flow objects in a polysurface-to-polysurface fashion Support direction setting. It is mostly used for flowing patterns to modify the shape

MULTI-SURFACE UNEQUAL RATIO CHAMFERING

Use curves to guide multiple groups of surfaces to chamfer in batches, and the value can be set freely Realize gradual R angle, regardless of the logic limitation of RHINO chamfering. It is mostly used for unequal chamfering between multi-surfaces

MULTI-SURFACE FILLETS

Use curves to guide multiple sets of surface chamfering, the value can be set freely Realize gradual R angle, regardless of the logic limitation of RHINO chamfering

SURFACE SELF-INTERSECTION TRIMMING

Surface self-intersection trimming can be realized Support batch trimming Support manual selection mode Batch pruning mode retains the largest part by default. It is mostly used for unequal chamfering between multi-surfaces

ONE-TO-MANY CURVE FLOW

One-to-many curve flow can adapt to the direction of the surface Various flow modes can be defined. It is mostly used for false line production.

ONE-TO-MANY SURFACE FLOW

One-to-Many Surface Flow Adaptable Surface Orientation. It is mostly used for batch pattern construction

BATCH EXTRUDE SOLID MESHES

Extrude solid mesh with surface Support direction setting Supports normal extrusion Supports surface orientation It is mostly used for pattern repair of 3D printing

SOLID PROCESSING LINE

Solid processing line Generate solid NC lines with objects such as curves, closed curves, and points Support ball knife sharp knife flat knife or custom knife

Support machining to depth surface

Mostly used for 3D printing NC line processing

TWO SETS OF FACE NORMAL LOCAL PROJECTIONS

Project objects with the new and old two-face method Support partial support limited range

It is mostly used for shoe shape modification

IP SHRINKING MOLD

Comparison of IP shrinking with shoemagics, shrinking wizard and other shrinking software Surface structure, color, layer and other properties will not change

GRANULAR RANGE SEGMENTATION

Range split surface Support multiple groups of object split Support solid, surface, planar curve split

Can automatically generate segmentation boundary lines and automatically group after the segmentation is completed It is mostly used for trimming and dividing large patterns

BATCH CONVEX HULL

Batch convex hull can use lines and surfaces to make convex hulls of various types of surfaces.It is mostly used for Boost pattern, uneven diamond pattern, etc.

BATCH MESH CONVEX HULL

It can automatically generate convex hulls in batches in the form of three-point arcs Parameters such as height and center point can be set freely

Supports generating convex hulls in the form of four-sided meshes or inlays. It is mostly used for pattern construction

BATCH ROUNDED CONVEX HULL

Batch rounded convex hulls Generate rounded convex hulls with planar closed curves Parameters such as radius and height can be set freely

It is mostly used for pattern construction

BATCH V-GROOVE

Batch V-groove Generate V-groove with untrimmed surface

Support custom height, support V-shaped center shape customization Support custom side radian

It is mostly used for pattern construction

BATCH U-SHAPED GROOVE

Batch U-shaped ditch Generate U-shaped ditch with untrimmed surface Support automatic height Support custom height

Support custom R angle

It is mostly used for pattern construction

BULK T-GROOVE

Batch T-groove Generate T-groove with untrimmed surface Support automatic height Support custom height

Support custom side radian top radian

It is mostly used for pattern construction

WATER RIPPLE SURFACE EXPANSION

Ripple Surface Unwrap Unwrap the side wall surface with boundary curves Support side wall upside-down expansion

Support custom curve direction expansion

It is mostly used for the unfolding of pattern pasting and veneering

SIDE WALL UPSIDE-DOWN

Removal of the side wall upside-down Remove the upside-down part with the boundary curve Supports lifting at angles Lifting at curved surfaces Maintains shape

It is mostly used for removing and inserting TPR molds

SQUISH SURFACE AUTOMATIC UNWRAPPING

SQUISH Surface Unfolding Unwrap the surface with the original structure of the surface It is mostly used for pattern pasting

BATCH POSITIONING OBJECTS TO SURFACE POINTS

Batch positioning objects to points on the surface Move objects to points on the surface in the direction of the surface. It is mostly used for pattern pasting of popcorn, etc.

MULTI-CURVE BLEND

Multi-curve blending Batch blending of multiple curves Supports curved or surface edges

Mostly used for 2D line repairing

DIFFERENTIATE COLORS WITH CURVES INSIDE AND OUTSIDE

Distinguish colors by the inside and outside of the curve. It is mostly used for pattern construction and is a classification curve.

Mostly used for 2D line repairing

LINK TẢI VÀ CÀI ĐẶT PHẦN MỀM ORANG-RHINO

The first step is to install CodeMeter so we can create a file to authorize the license.

• CodeMeter software for windows 10 or above;

https://drive.google.com/file/d/15iY6g-uAXMartnE0FyftuNyLyifcPnxp/view?usp=drive_link

https://drive.google.com/file/d/1SuC6z4s-9f4SE7RwlIpN7iyLb2YhrzK9/view?usp=drive_link

• CodeMeter Software for windows 7

https://drive.google.com/file/d/1M2h9ueX1WL9Ek3Bo8ZacvYoGrd4-jfec/view?usp=drive_link

After installing we will use CodeMeter to create the file for validation, this file you will send to me, and then I will return it with a valid license.

Follow the steps above;

https://drive.google.com/file/d/1ynAd78lIaD03NXBfcB52wTmqa5ODpZGI/view?usp=drive_link

To install the plugin on an individual computer follow the steps in the video above;

https://drive.google.com/file/d/1ZhCRurmSMU2T6RLr8YMuglV3awYOaoaV/view?usp=drive_link

Files for installation 

• Orang 3.04

https://drive.google.com/file/d/1e0qzBhtuDG53XBeEGCEyO0IzD8zwNOCb/view?usp=drive_link

• Single Fonte Curve

https://drive.google.com/file/d/1at0RPZApxb7MXIbfAGAN3LldUmZ7zKQY/view?usp=sharing

• Orang Grade 1.6

https://drive.google.com/file/d/1O0MOu492g_zDnOkUT1tLhjRrOWncdNX8/view?usp=drive_link

• Full course in Portuguese with English interface;

https://drive.google.com/drive/folders/16WzZl7jNR3RvqbR-ULSYZ4EmIDQqF1MA?usp=drive_lin